SOM NO LIMITS 13SW16000 Ver2-BD(18)

Drag MAX: 17kg
Thread winding capacity: PE6-300m, PE5-350m, PE4-400m

[Compatible model]
Shimano/08&13 Stella SW8000~14000 Class
19 Stella SW10000~14000
09&11&15 Twin Power SW8000~14000 Class
*Please note that it does not fit 19 Stella SW8000.

●A7075T6 Multi-cut ring The
conventional SOM elliptical ring and S ARC/D ABS II. were the same concept from the perspective of adding some resistance to the line emitted during casting.
This was done by narrowing the line loop by resistor and smoothing the introduction of the line to the source guide, which reduced line troubles and made full casting possible.
However, since the ring resistance is continuous, in the second half of the cast, that resistance became the brake for line release. This time, the taper angle of the spool ring is closer to that of the distance-first casting reel, while introducing a large variable cutting surface at the bottom of the ring.

The line released immediately after casting hits the spool ring vigorously, so the multi-cut surface adds some resistance like an elliptical ring and prevents line trouble.

In the middle to late casting, the lure slows down its casting speed due to air resistance, weakens the momentum of the line released from the spool, and the loop expands, reducing contact with the variable cut surface. Since the ejected line only touches the upper end of the spool ring, the tapering angle with low resistance minimizes ejection resistance.
When casting in a tailwind state, it has a cast feel that gives the illusion that it is stretched in the second half of casting compared to conventional rings.
The ring material is machine-cut from the strongest A7075T6 of aluminum material and protected with extra-thick black anodized aluminum.

●New shape radiator unit
●Waterproof performance improved
●Drag washer (carbon + stainless steel)
●Pure Teflon long wease